Maintenance Tech I- Nights (7pm-7am)

PAC Worldwide | Phoenix, AZ

***Criminal Background Friendly Employer***

Applying to this job will open a new window on the employer's web site to apply there.

Posted Date 3/26/2020
Description

Summary:

Level I tech should understand the basic principles of mechanical repairs on industrial machinery, basic electrical practices, and be able to apply general building maintenance repairs.

Essential Duties and Responsibilities:

Understand and able to perform all maintenance apprentice duties marked as (0) and maintenance tech level 1 marked as (1)

0 Able to cut steel to specific measurements

0 Able to keep workshop clean and organized

0 Able to work in a safe manner

0 Anchor a machine

0 Have driver’s license and able to use company truck

0 Be able to use basic hand tools, such as file, hammer, scriber, pipe wrench, center

punch, de-burring tool etc.

0 Change gearbox oil

0 Construct pallet racking

0 Do an oil change

0 Drive a fork truck

0 Grease a machine correctly

0 Know how to use and read tape measure

0 Lifting up to 100 lbs.

0 Replace factory lights

0 Use a grinder

0 Use labeling machine for parts inventory

0 Use the drill press

0 Operate scissor truck

0 Assisting in wire pulls

1 Able to perform general building maintenance (painting, drywall repair, office issues)

1 Basic woodwork skills for building a crate or skid

1 Complete maintenance / safety request

1 Be able to repair airshafts

1 Be able to splice belts

1 Do PM on machines

1 Install belts and check for proper alignment

1 Maintain emergency lighting

1 Oil filter changes

1 Rebuild a gearbox

1 Rebuild pneumatic cylinders

1 Repair a bagger

1 Repair a case sealer

1 Replace a glue module

1 Replace a solenoid valve

1 Replace brushes on an electrical motor

1 Replace filters, for oil, air, hot melt and compressed air

1 Replace gears

1 Replace nichrome wire on a seal head

1 Replace timing a V belts, correct tension

1 Sweat copper pipe perform general plumbing repairs

1 Use proper lock out/tag out procedure

1 Work on pipe work using sealant and thread tape (pipefitting)

1 Align couplings on pumps/motors

1 Assemble new parts from scheme, determine if they do not fit what is incorrect when looking at the drawings

1 Be able to do machine rigging

1 Being able to set a guillotine correctly

1 Being able to set a photocell

1 Change oil pumps

1 Change out rotary unions

1 Determine if a heater element is bad

1 Familiar with machine controls

1 Familiar with the operation of the air compressor, dryer and oil water separator

1 Gas weld

1 Install crane systems

1 Rebuild and set tear tab punch

1 Be able to set and gap correctly the bubble crusher

1 How to change belts on the roof fans and AC units

1 How repair factory lights for bad ballast or motion sensor

1 How to set pouch seal bar gaps correctly

1 How to set pouch seal bar strippers

1 How to adjust the gusset attachment

1 How to change filters for the oil water separator

1 How to change filters for AC system

1 How to set a bubble piercer correctly

1 How to put a slot nozzle on a hot melt gun

1 How to test if a photocell is good or bad

1 Be able to start and stop the air compressors

1 Be able to perform a factory start up

1 Be able to perform a factory shut down

1 Know what to do during a power outage on the machines

1 Able to replace filters in hot melt tanks and guns

1 How to read mechanical drawings to allow assembly of attachments

1 Able to use the sand blaster

1 Able to replace blades on the thermoformer perforators

1 Able to change PAC zip and crush cut harden rollers

1 Be able to rebuild safety chucks on the thermoformers

1 Able to operator the snow plow and salt unit on company truck

1 Able to replace outside light bulbs

1 How to replace thermoformer cast roller bearings and gears

1 Racking installation and repair

Supervisory Responsibilities: no yes (list positions reporting to this person)

Qualifications:

  • General mechanical experience in industrial environment
  • General electrical experience in industrial environment
  • Able to operate forklift
  • Able to operate scissor lift

Education and/or Experience

  • High school graduate or equivalent
  • 2 to 4 years’ experience in a maintenance environment

Language Skills

  • English, oral and written communication skills (required)

Mathematical Skills

  • Basic mathematical skills
  • Have understanding of decimals and fractions

Reasoning Ability

  • Basic reasoning skills
  • Have the ability to work through electrical and mechanical issues as they arise

Computer Skills

  • Basic computer skills, required

Certificates, Licenses, Registrations

  • Valid driver’s license, required
  • Forklift certification, required
  • Scissor lift certification, required

Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Ability to lift up to 100 lbs.

Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • The environment is consistent with a manufacturing and office atmosphere. Heating is provided in the winter and basic cooling in the summer. Work may be required to be performed outside of the building.
  • Work is performed by using both hands and arms while in a standing position, including frequent bending, reaching, twisting, pushing, pulling, squatting, or kneeling for an eight hour shift.
  • Ability to work in hot/humid or cold environments.
  • Moderate noise level.
  • Occasionally works in high areas.

Share this job